wp_headers vs send_headers. When to use each?

Ok so I think I figured it out…

Both of these work for the most part as you’d expect by sending http / php headers to the browser. wp_headers is actually a filter inside the send_headers() functions.You can use this to modify the headers before they’re sent to the browser with some exception. wp_headers won’t be able to do anything if it’s a static cached page were dealing with…

This is where the send_headers hook comes into play. After the wp_headers filter, the send_headers() function checks if Last-Modified has been sent with would tell us if the page was cached or not and then lets us hook into it after caching, content type, etc have all been sent.

So for my example using X-UA-Compatible, while they both work, I’m inclined to use send_headers. Why? For one if you were to add both of these, send_headers would win out every time and would ensure that it was loaded even if added after the page was cached.

While using a <meta> tag like many popular frameworks use would also work for x-ua-compatible, it will not work in many browsers unless loaded almost immediately after the opening head tag. This is caused by various reason like if the “intranet” setting is set network wide. For this reason using the php method is safer. However, if you were to add both, the meta tag would win (assuming it was including early enough.

In regards to X-UA-Compatible compatible, I’m hoping this will be irrelevant soon since Microsoft is dropping support for older versions of IE next week!

Also, I tested the wp_headers filter without using the is_admin() check and it won’t modify the admin_headers so that check is unnecessary.

If you did need to modify the admin headers for some reason, I know you can do it like this, but I’m not sure if it would work all the time…

function admin_add_my_header() {
    header('X-UA-Compatible: IE=edge,chrome=1');    
}
add_action( 'admin_init', 'admin_add_my_header', 1 );

Updated Answer based on Toscho’s suggestion to check for admin:

is_admin() || add_action('send_headers', function(){ 
    header('X-UA-Compatible: IE=edge,chrome=1'); 
}, 1);

Related Posts:

  1. How to properly modify WP Vary or any existing headers?
  2. How would I use a filter to remove header banner on certain post types
  3. What is the very earliest action hook you can call?
  4. How many filter/action hooks are healthy?
  5. Earliest hook to reliably get $post/$posts
  6. Remove Editor From Homepage
  7. What does (10, 2) mean when used with add_filter
  8. Valid characters for actions, hooks and filters
  9. Advanced Custom Fields and Yoast SEO keyword analysis [closed]
  10. How to check if a hook is hooked or not?
  11. How to set custom cookies before output
  12. Store source permalink on XMLRPC calls
  13. How to make post and comment count unclickable with dashboard_glance_items hook
  14. Hook into admin post list page
  15. How to remove X-Frame-Options: SAMEORIGIN” from WordPress?
  16. How do I know if author field was changed on post save?
  17. About Hooks and Filters
  18. Should I use add_action(‘publish_post or add_filter(‘publish_post?
  19. add_action uses ‘echo’ add_filter uses ‘return’, why?
  20. changing variable through filters or action hooks
  21. Too many actions/filters!
  22. Apply a filter only once
  23. How to get list of all hooks of current theme / plugin?
  24. Making a class available via actions filters
  25. Anonymous function is executed twice in wp_head while added from the_posts filter?
  26. Explanation for remove_filter used in the below code [closed]
  27. How to change the blog title with add_filter? details below
  28. How To Get User Data in Callback Function for pre_user_nicename?
  29. What’s the best way to split admin-only functionality in the theme’s functions.php file?
  30. Filter list by a unique meta value dilemma
  31. return values from hooks do_action and apply_filters, which is better
  32. How to get all the predefined do_action() calls from an active theme
  33. Is it possible to track down Actions and Filters?
  34. When to use actions and when to use filters
  35. Return a custom value in a function added to an action hook
  36. Same Conditionals Not Working on Two Different Hooks
  37. Can the wp_filter object hold multiple values with the same key
  38. apply_filters/do_action tag characters limit
  39. Is there a filter called ‘network_admin_init’?
  40. Filter taxonomy admin pagination
  41. Insert term when page is published – avoid duplicates after edits
  42. Are there actions or filters I can use for Ajax calls?
  43. Capture post content before page renders
  44. Correct method of redirecting user login
  45. How to remove action with slashes and arrows?
  46. Can the wordpress color palettes by changed through Javascript?
  47. How do I use remove_action on an add_action that uses an array?
  48. Changing WordPress core without hacking core
  49. How to pass variables to custom filter from multiple functions
  50. Comment search plugin
  51. How to customize the “Insert/edit link” popup box?
  52. Proper after_setup_theme and wp_head cleanup
  53. How to get a single hook from wp_head()?
  54. Add a filter inside an action init
  55. Is it possible to apply_filter on a wp_ajax_ action?
  56. Filter for when the post is updated
  57. Add a filter to an action [closed]
  58. How can I specify the post status of an untrashed post?
  59. Filter get_page_by_path()
  60. why require – does not load filter
  61. Remove actions/filters that are set with create_function()
  62. Most performant/functional way to add actions/filters?
  63. Remove tags without a specific meta key from “choose from the most used tags”
  64. How to access page variable inside action hook
  65. What is the action hook to use if you want to capture the new password during password change?
  66. Use has_filter on comment_post
  67. Echo string in admin panel footer beside version no
  68. How to change default text for specific post type
  69. How can I edit comment meta value before it is saved?
  70. Disable sanitize_file_name on upload without modifying functions.php
  71. Redirect after post deleted
  72. Making an add_filter() call from within an add_filter() call
  73. Plugin default settings hook
  74. alternative to the_content filter
  75. Action hook to control access to certain parts of my site
  76. Finding actual functions added to hooks and filters
  77. Replace Data In Post & Update Meta Field Post Is Saved
  78. How to pass a variable between filter/action functions?
  79. style_loader_tag not changing stylesheet to preload
  80. Adding link options in insert/edit link dialog window
  81. Hook to change the site URL
  82. How can I see exactly what arguments are being passed through a filter so that I may modify them?
  83. WordPress set featured image to first image of the post
  84. Does anybody know what the $current_screen ->id for customizer.php is?
  85. adding an action inside if condition not working
  86. Using add_filters() , apply_filter(), add_action() and do_action() in extending a plugin
  87. Action for opening attachment or manipulating all attachment links
  88. Put data in my-account/view-order/id/ page
  89. What action/filter can be used for modifying the page to be rendered?
  90. Hook inside a hook
  91. check, if any “add_action” function contains string XXXXXXXXX
  92. Remove action added from class
  93. Hook into ‘when user logs in’ [persistent login]
  94. Custom registration field to SQL database
  95. Updating User Profile on Registration
  96. Is this correct usage of filters in WordPress [closed]
  97. How would I remove an inline googleAPI font script in the the parent theme header.php?
  98. can’t output gray scaled image I’ve created using add_image_size
  99. GET form action. Redirect to self
  100. Can you call a filter hook by “add_action”?

Leave a Comment